The wet dust collector is a combination of two forms of water bath and spray. First, the suction of the high pressure centrifugal fan is used to press the dust gas into a water tank with a certain height of water. The water bath will adsorb a part of the dust in the water. After all distributary, the gas flows upwards, and the high pressure sprinkler sprinkles water mist up and down and traps the remaining dust particles. Its filtration efficiency is more than 85%Send Inquiry
Wet dust remover can effectively remove liquid or solid particles with a diameter of 0.1 - 20 microns from the air flow, and can also remove some gaseous pollutants. The utility model has the advantages of simple structure, small floor area, convenient operation and maintenance, high purification efficiency, etc., and can handle the airflow of high temperature and high humidity, so that the possibility of fire and explosion can be minimized. But when the wet dust collector is used, special attention should be paid to the corrosion of the equipment and pipes, and the treatment of sewage and sludge. The process of wet dust removal is also not conducive to the recovery of by-products. If the equipment is installed indoors, it is necessary to consider the problem that the equipment may be frozen in the winter. Furthermore, if the removal efficiency of fine particles is higher, dispersion is required to liquid better, but the energy consumption.
The dust collector has high dust removal efficiency with a particle size less than 5 u m dust and has a service life of up to 5~8 years. The dust collector has compact structure, small occupied space and small water consumption. It occupies 5~7 cubic meters per second, and the area of dust laden airflow is about 4 square meters, and the water consumption is about 1 tons / hour.
Parameters Of Wet Dust Collector