Characteristics Of Belt Type Self-cooling Electromagnetic Magnetic Separator
Jun 25, 2018

1.Large thermal area: heat dissipation structure with multi-layer windings and cooling fins, air convection layer between the windings, so that the heat dissipation area is increased by 6 to 7 times that of the traditional method, greatly reducing the temperature rise and the surface temperature of the core, making the iron remover Meet the requirements of continuous safe and stable operation.

 2. Good insulation: Windings are made of double glass fiber coated enamelled magnet wire, processed by vacuum epoxy casting and vacuum impregnation, and have excellent insulation and corrosion resistance.

 3, the magnetic properties of stability: the use of high permeability, high saturation magnetic induction DT4 electric iron as a core, increase the induction magnetic field and enhance the stability of the total magnetic field.

 4, good heat conduction: the use of special insulation thermal grease filling the air gap between the electromagnetic wire, increase the duty cycle, so that the core internal heat conduction smoothly.

 5. The rectifier output is stable: The control cabinet is rectified by a silicon rectifier module and is a constant voltage output. Corresponding to this, the thyristor output current whose output voltage can be adjusted will drift with the change of the ambient temperature, and there is a risk that the adjustment deviation will be too large due to the trigger insensitivity and the host will be burned. The module rectification effectively avoids the above shortcomings and eliminates the influence of human operation factors, which ensures the continuous and stable operation of the equipment.

6, the transmission system is stable, the failure rate is low: the drum adopts the drum drum with automatic correction function, self-made fully sealed bearing seat, the bearing adopts a wide series of heavy-duty bearing; the idler adopts heavy idler; the unloading belt scraper adopts rubber Material, reduce noise and prevent ferromagnetic impurities from being caught in the belt causing damage, there is no situation where the belt bolts fall off after the belt bolts are worn out; the gear motor adopts domestic first-class products, avoiding the phenomenon of easy oil leakage in the operation of the reducer; Shafts and Lockshaft products.

If you are intrested in our products, please contact us

Contact: Della

What's App & Wechat: 0086-13929907491


  • facebook