The Won Yard circular sieve is especially recommended for control and safety sieving for both solids and liquids. It is very useful in confined spaces where the reception of material and the unloading of the sieved product are in close proximity. It permits a large product volume and a single sieving level.
They are often installed at the outlet of discharge chutes, grinding mills, mixers, etc. The inlet feed and product outlets are on the center of the sieve shaker itself, it acting practically as a strainer. It is easy to install. It can be supplied on a wheeled support or alone, to be inserted within an installation.
It is made from stainless steel (AISI 304 or AISI 316) with two lateral motors, fitted on opposite sides, through which a three-dimensional motion in the horizontal and vertical planes is achieved, allowing excellent material flow.
It can be supplied on a wheeled support or alone, to be inserted within an installation.
Available diameters: ø 550 / ø 800 / ø 1200 mm.
In case available space is minimal and product flow is sufficient, low profile BP series is available. In this series the machine height is lower than the standard series, becoming a compact sieve shaker.
Avaible diameters: ø 800 / ø 1200 mm
1.Minimum Order Quantity: 1 Unit
2.Brand: Won Yard
3.Area of Applications: Chemical industries, mining industries
4.Diameter: 400 mm up to 1500 mm
5.Apmlitude: 3-5 mm
6.Rated Speed (RPM): 1440
7.Type: Screen Separator
We leading manufacturer, supplier, exporter of Circular Screen Separator in Foshan Guangdong China. The top weight on the Circular Screen Separator in a plane close to the center of the mass of assembly. Rotation of the top eccentric weight creates vibration in the horizontal plane, which causes a material to move across the screen cloth to the periphery. Increasing the top eccentric mass, increases the horizontal throw, causing an oversize material to discharge at a faster rate. The bottom eccentric weight rotates below the center of mass, creating tilt on the screen, giving vibration in vertical & tangential planes.
Increasing the vertical component of motion, which promotes turning over of material on the screen surface, helping maximum quantity of undersize material to pass through the screen. The vertical motion also minimizes blinding of the screen by "near size" particles. The tangential component of motion is controlled by the angle of lead given to bottom weights in relation to top weight. Variation in lead angle controlled the spiral pattern of material travel over the screen cloth. Speed & flow pattern of material travel over the screen cloth can be set by the operator for maximum throughout & screening efficiency for any screen able product wet or dry coarse or heavy fine or light hot or cold. Typical material passes rapidly through the screen during its travel to the periphery. The over size, material get continuously discharged through a tangential outlet.
1.Extremely robust and reliable. It can work 24 hours a day.
2.It occupies little space.
3.It allows for a large product volume.
4.Central loading and unloading of material.