The separator is uniformly fed into the upper part of the PTMS magnetic separator through the oscillation feeder. The rotating cylinder throws the non-magnetic material away from the cylinder. The magnetic material is attracted to the cylinder by the strong magnetic field force, and the magnetic and non-magnetic materials are conveniently and accurately separated by the ore separator.
The low grade magnetite, river sand and steel slag are separated, and the remaining tailings are removed by the primary process of PTMS magnetic separator, so that the grade of lean ore is enriched. Dry series mechanical requirements are sorted ore material dry enough, particles can move freely, maintain an independent state, otherwise it will affect the magnetic separation effect of the equipment, and even cause the result of separation.
Strong excitation delay control link it is provided from the detection of iron material signal, until the iron material just runs to the front end of the PTMS magnetic separator pole shoe for delay, and then start the strong excitation control signal, start the strong excitation trigger link, strong excitation at all times, and reduce the strong excitation time as much as possible. Not to miss the point of catching a good opportunity.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com