The mineral PTMS Electromagnetic Separator iron removal process is like sandpaper constantly polishing the surface, and the friction gradually reduces the thickness of the outer ring and changes the flatness of the surface. The inhomogeneity of the magnetic field distribution is also a nonnegligible factor. The magnetic field inside the magnetic separator is like an invisible "power field". If the power field is not evenly distributed, then the magnetic field force of the outer ring in different regions will be different.
This difference will cause the PTMS Electromagnetic Separator outer ring to bear more pressure and stress in areas with large magnetic field force, which will accelerate the wear in this area. The axial beating of the rotating ring parts is like an unstable "rhythmer", which disrupts the normal operation rhythm of the magnetic separator. When the rotating ring component beats axially, it will have an irregular impact force on the outer ring.
This impact force is not evenly distributed on the surface of the PTMS Electromagnetic Separator outer ring, but concentrated in certain specific points or areas, resulting in increased local wear on the outer ring surface and forming an uneven wear state. The presence of a magnetic conductive medium is like a special "interference source" set inside the magnetic separator.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The high field permanent magnet PTMS MAGNETIC SEPARATOR after energy saving transformation meets the requirements of sustainable development
