What is the principle of PTMS Electromagnetic Separator? It is used in the reuse of powder particles in the removal of iron powder, etc., magnetic separator is widely used in resource recovery, wood industry, mining, kiln industry, chemistry, food and other workshops, suitable for particle size of 3mm below magnetite, pyrrhotite, roasted ore, ilmenite and other materials wet magnetic separation,
Wet magnetic PTMS Electromagnetic Separator mainly consists of six parts: cylinder, roller, brush roller, magnetic system, tank and transmission part. The cylinder consists of 2-3mm stainless steel coil welded into a cylinder, the end cover is cast aluminum parts or workpieces, and the cylinder is connected with stainless steel screws. The motor drives the cylinder, magnetic roller and brush roller to rotate through the reducer or the stepless speed regulating motor directly.
The magnetic system is an open magnetic system, housed in a PTMS Electromagnetic Separator cylinder and a bare full magnetic system. The magnetic block is mounted on the bottom plate of the magnetic yoke with a stainless steel bolt, the shaft of the magnetic yoke extends out of the cylinder, and the shaft end is fixed with a crank arm. The swing arm can adjust the magnetic system deflection Angle, and can be fixed with a pull rod after proper adjustment. The working area of the tank body is made of stainless steel plate, and the rest of the frame and tank body are welded with ordinary steel.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The high field permanent magnet PTMS MAGNETIC SEPARATOR can accurately capture micron-level iron impurities
