When the suspended PTMS magnetic separator is used for a long time, it will inevitably be stained with a lot of iron chips or other impurities. If the impurities are too much, the use effect will be greatly reduced. In order to keep the good effect of the equipment, we need to clean the equipment regularly.
1. The surface of the magnetic source or magnetic medium is smooth and clean. After cleaning, there should be no mud on the surface of the hanging PTMS magnetic separator.
2, energy saving, environmental protection. In the cleaning process, the cleaning time is short, the cleaning water consumption is less, and the environmental pollution is small.
3, the iron to be thorough. In the design of iron removal channel, the cleaned sewage must be thoroughly discharged from the machine, so that the impurities in the sewage can not precipitate in the channel, and affect the effect of iron removal.
4. High degree of automation. Automatic determination of cleaning cycle, automatic cleaning and automatic treatment of sewage are the trends of PTMS magnetic separator equipment.
5. Simple structure. For convenient installation, use and cleaning, the equipment structure should be easy to install and disassemble and internal inspection and cleaning.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The intelligent control system is applied to PTMS MAGNETIC SEPARATOR to solve the disadvantages of traditional methods
