Bearing for the full load of PTMS MAGNETIC SEPARATOR, so good lubrication has a great relationship to the bearing life, it directly affects the service life and operation rate of the machine, so the injected lubricating oil must be clean and sealed must be good, the main oil injection of the machine, rotating bearings, roller bearings, all gears, moving bearings and sliding plane. The newly installed wheel hoop is prone to loosening and must be checked frequently.
Pay attention to whether all parts of the PTMS MAGNETIC SEPARATOR work normally. Pay attention to check the wear degree of easy to wear parts, pay attention to replace the worn parts at any time. Put the bottom frame plane of the moving device, the dust and other things should be sent out to avoid the moving bearing can not move on the bottom frame when the machine encounters the material that cannot be broken, resulting in serious accidents. If the bearing oil temperature increases, stop and check the cause immediately.
PTMS MAGNETIC SEPARATOR The equipment shall be installed on a horizontal concrete foundation and fixed with anchor bolts. Attention should be paid to the vertical of the host and the horizontal during installation. After installation, check whether the bolts in each part are loose and whether the main engine warehouse door is fastened. Please tighten them, if any.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The intelligent control system is applied to PTMS MAGNETIC SEPARATOR to solve the disadvantages of traditional methods
