Wet PTMS magnetic separator: Press the forward or backward button on the power distribution cabinet, and drive the electromagnet to the appropriate position. Press the excitation stop button, and then return to the original position after all the iron on the disk body is unloaded. After parking the coal conveyor belt, all the iron lifted by it should be unloaded before stopping the machine. During parking, it should check whether the operating parts are short of oil and should be maintained and maintained in time.
To prolong the life of PTMS magnetic separator, it is necessary to maintain and store the equipment. The screws and frequently rotating places of the equipment should be filled with butter and lubricant. Replace the lubricating oil in the reducer every six months, and oil the double bearing at both ends of the drum 2-3ml once a week. The support should be removed at least once a year, the cylinder should be cleaned inside and outside and the bearing part of the cylinder should be checked whether there is any wear and deformation. The machine cannot be stored at too high or too low temperature, which will affect the strength of magnetism.
PTMS magnetic separator, as a separator, suffers great wear during operation, so many users want to extend the service life of the equipment. So the current method can effectively extend the service life of the equipment.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The intelligent control system is applied to PTMS MAGNETIC SEPARATOR to solve the disadvantages of traditional methods
