During work, the operation of the PTMS magnetic separator device must be checked frequently. If abnormal phenomena are found, such as tape offset, joint clamp opening and body swing, stop immediately and report to the plant control room. To eliminate or solve the iron removal machine fault, must cut off the power. When driving on the ground, after receiving the stop signal, when there is no material on the equipment, you can press the stop button to stop.
Control PTMS magnetic separator parking is centrally controlled by dispatch. Before handing over the work, clean the work area and arrange the items neatly. It SHALL BE HANDED OVER TO THE SITE, AND THE SUCCESSOR SHALL be required to explain in detail the operating status, faults and existing problems of the iron removal device, fill in the operation log as required, and execute the program handover.
Dry PTMS magnetic separator is a commonly used metal ore beneficiation equipment. Iron ore, manganese ore and so on need dry magnetic separation to have a good separation effect. It is also widely used in mineral processing and abrasive, refractory materials, ceramics, chemical, grain processing and other industries of iron removal.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The high-gradient PTMS MAGNETIC SEPARATOR adopts a modular design concept, which is conducive to installation
