When dry PTMS MAGNETIC SEPARATOR bearings are seriously worn or damaged, they should be replaced in time and pay attention to strengthen lubrication. When replacing bearings, choose high quality bearings with the same specifications as the original bearings. Because the bearings of different specifications may not match perfectly with the other parts of the magnetic concentrator, thus affecting the normal operation of the equipment.
For using conical roller bearings, be careful to check the axial spacing of the bearings to be 0.2-0.4 mm. The size of this axial interval directly affects the force distribution and operation stability of the bearing. If the axial interval is too small, the bearing may cause overheating due to increased friction between internal parts; if the axial interval is too large, the bearing may shake during operation, affecting the overall stability of PTMS MAGNETIC SEPARATOR.
The process of iron removal is not smooth, which can be adjusted by adding or subtracting the paper pad at the bearing cover. During the adjustment, be careful to measure the thickness of the paper pad accurately each time to ensure that the appropriate axial interval can be achieved. The above is the PTMS MAGNETIC SEPARATOR parts replacement skills, I hope to help you.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
the environmentally friendly ptms magnetic separator technology uses new materials and energy saving
