PTMS magnetic separator The PTMS magnetic separator is an open magnetic system, which is housed in a cylinder and has bare full magnetic field. The magnetic block is mounted on the bottom plate of the magnetic yoke with a stainless steel bolt, the shaft of the magnetic yoke extends out of the cylinder, and the shaft end is fixed with a crank arm. The swing arm can adjust the magnetic system deflection Angle, and can be fixed with a pull rod after proper adjustment. The working area of the tank body is made of stainless steel plate, and the rest of the frame and tank body are welded with ordinary steel.
There are many factors affecting the operation of PTMS magnetic separator. In addition to the box type, magnetic system structure and magnetic field characteristics, there are also magnetic system declination Angle, working gap, separation concentration and cylinder speed. If the magnetic system deflection Angle is not appropriate, it will obviously affect the separation index. The distance between the surface of the coarse selection cylinder and the bottom plate of the bottom box is called the working gap.
The size of the working gap affects the effect of PTMS magnetic separator. The concentration of separation determines the slurry flow rate of a certain amount of ore and affects the separation time of ore particles. The size of the cylinder speed also has an impact on the selection index, and the speed is low and the output is low. High rotational speed, the centrifugal force on the ore particles, the magnetic turnover per unit time has been increased, the concentrate grade and processing capacity are high, and the recovery rate is reduced.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The intelligent control system is applied to PTMS MAGNETIC SEPARATOR to solve the disadvantages of traditional methods
