High intensity magnetic roll is the core component of high intensity magnetic roll PTMS magnetic separator, and it is also a high value component. It is mainly composed of no magnetic end cover, no magnetic core shaft ring type magnetic yoke and ring rare earth permanent magnet, which is characterized in that the ring type magnetic yoke and ring type rare earth permanent magnet are staggered and have no magnetic envelope Angle.
PTMS magnetic separator is mainly composed of nine parts: frame, receiving hopper, electromagnetic vibration feeder, strong magnetic roller, non-magnetic drum, light ring belt, driving motor, hopper and electric control cabinet. The magnetic induction intensity of the strong magnetic roller of the magnetic separator can reach Gauss. The roller adopts open air gap magnetic circuit design, which is composed of rare earth permanent magnet strong magnetic ring and high permeability magnetic material yoke, according to the principle of permanent magnet agglomeration.
With the strong magnetic roller as the core, dry single roll or multi-roll belt PTMS magnetic separator can be formed. The strong magnetic roller type mainly sorts out the debris in the process of transportation and loading and unloading, sorts out the cylinder of the magnetic separator, and the hand-rotating magnetic separator should have no collision, noise, and tighten loose screws.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Why for PTMS Electromagnetic Separator magnetic roll the static balance test should be done after replacement
