Foshan Powtech Technology Company Limited.
Home > News
How does jaw crushing work with PTMS magnetic separator
Time: Feb 26,2023

magnetic separator factory

PTMS magnetic separator is widely used in mining, smelting, building materials, highway, railway, water conservancy and chemical industries. It is used to break all kinds of materials whose compressive strength does not exceed 320 mpa. The working mode of jaw crushing (jaw breaking) is flexural extrusion type. Its working principle is: the motor drives the belt and pulley, and the moving jaw moves up and down through the eccentric shaft.


PTMS magnetic separation

When the movable jaw rises, the Angle between the elbow plate and the movable jaw becomes larger, so as to push the movable jaw plate close to the fixed jaw plate. At the same time, the material is crushed or split to achieve the purpose of PTMS magnetic separator; When the moving jaw goes down, the Angle between the elbow plate and the moving jaw becomes smaller, the moving jaw plate leaves the fixed jaw plate under the action of the pull rod and the spring, and the broken material is discharged from the lower mouth of the crushing chamber. With the motor continuous rotation and broken jaw for periodic motion crushing and discharge of materials, to achieve mass production.


what is magnetic separation method?

The linear vibrating PTMS magnetic separator is a new high-efficiency screening equipment, widely used in mining, coal, smelting, building materials, refractory linear screening materials, light industry, chemical industry and other industries.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com

FOSHAN POWTECH TECHNOLOGY COMPANY LIMITED.

No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com

QR code

Copyright © Foshan Powtech Technology Company Limited. All Rights Reserved.   Sitemap   XML