After the slurry flows into the tank through the feed box, under the action of the water flow of the feed pipe, the ore particles enter the feed area of the tank in a loose state. In PTMS magnetic separator, magnetic particles are magnetically polymerized and form "magnetic group" or "magnetic chain", which is subjected to magnetic force in the slurry and moves towards the magnetic pole and is adsorbed on the cylinder.
Because the polarity of the magnetic pole along the direction of the rotation of the cylinder is alternately arranged, and fixed at work, "magnetic group" or "magnetic chain" in rotation with the cylinder, due to the magnetic pole alternating magnetic stirring phenomenon, is included in the "magnetic group" or "magnetic chain" gangue and other non-magnetic minerals fall off in the flip, The concentrate is the "magnetic mass" or "magnetic chain" that is eventually absorbed on the surface of the PTMS magnetic separator cylinder.
The concentrate is transferred with the PTMS magnetic separator cylinder to the edge of the magnetic system where the magnetic force is weakest. It is discharged into the concentrate tank under the action of the flushing water spouted by the ore discharge pipe. If it is a full magnetic roll, the ore discharge is carried out with a brush roll. Non-magnetic or weakly magnetic minerals are left in the pulp with the pulp out of the tank, that is, tailings.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com