After the slurry flows into the tank through the feed box, under the action of the water flow of the feed pipe, the ore particles enter the feed area of the tank in a loose state. Under the action of magnetic field, magnetic particles converge and form "magnetic group" or "magnetic chain". The "magnetic group" or "magnetic chain" is subjected to the magnetic force in the pulp, moves towards the magnetic pole, and is adsorbed on the cylinder of PTMS magnetic separator.
Because the polarity of the magnetic poles is arranged alternating along the rotation direction of the PTMS magnetic separator cylinder and is fixed during operation, the magnetic stirring phenomenon occurs due to the alternations of the magnetic poles when the "magnetic group" or "magnetic chain" rotates with the cylinder, and the gangue and other non-magnetic minerals which are included in the "magnetic group" or "magnetic chain" fall off during the rotation. The concentrate is the "magnetic mass" or "magnetic lotus" that is eventually sucked on the surface of the cylinder.
Concentrate with the cylinder to the magnetic edge of the magnetic system is the weakest, in the discharge of ore water pipe under the action of flushing water is discharged into the concentrate tank, if it is full magnetic roller, discharge is carried out by brush roller. Non-magnetic or weakly magnetic minerals are left in the pulp with the pulp out of the tank, that is, tailings. The whole process of PTMS magnetic separator is completed.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Preparation work before implementing PTMS MAGNETIC SEPARATOR energy-saving retrofit
