When the PTMS magnetic separator is used for a long time, it will inevitably be contaminated with a lot of iron chips or other impurities. If the impurities are too much, its use effect will be greatly reduced. In order to keep the good effect of the equipment, we need to clean the equipment regularly.
1. The surface of the magnetic source or magnetic absorbing medium is smooth and clean. There should be no mud on the surface of the PTMS magnetic separator after cleaning.
2, the iron to be thorough. In the design of iron removal channel, the cleaned sewage must be completely discharged from the machine, so that the impurities in the sewage can not precipitate in the channel, and affect the effect of iron removal.
3, energy saving, environmental protection. In the cleaning process, the cleaning time is short, the cleaning water consumption is less, and the environmental pollution is small.
4. High degree of automation. Automatic determination of cleaning cycle, automatic cleaning and automatic treatment of sewage are the development trends of permanent magnet PTMS magnetic separator.
5. Simple structure. For convenient installation, use and cleaning, the equipment structure should be easy to install and disassemble and internal inspection and cleaning.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Preparation work before implementing PTMS MAGNETIC SEPARATOR energy-saving retrofit
