Inform the PTMS magnetic separator to switch off the power before the cleaning begins. Clean up after the belt conveyor stops conveying materials to avoid injury to people by the operating machine. And then to the control cabinet of the iron remover, in addition to the iron remover power failure, make marks on this button, such as hanging a warning sign that says "someone is working, forbidden to close", to avoid other staff in the ignorance of the situation when the switch on by mistake, hurt people.
To clean the PTMS magnetic separator, first of all, clean all the iron that falls from the iron removing accessories. Then press the power switch to power the iron removal machine again, remove the warning board hanging on the button, and then switch the main command to the "centralized control" position. After the belt conveyor stops, the two control command switches of "local" and "centralized control" on the operation box of the belt conveyor head reach the "stop" position, and do not forget to hang the "stop sign".
When removing iron from PTMS magnetic separator, appropriate protection should be done. After all, safety is the priority.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The intelligent control system is applied to PTMS MAGNETIC SEPARATOR to solve the disadvantages of traditional methods
