If the user has high requirements on the impurity removal rate, more solid balls such as steel balls and bolts, larger material size and thicker material layer, it is recommended to select the super magnetic PTMS magnetic separator. Multistage iron removal, generally should not be less than two stages. Multistage iron removal should be used as far as possible to install iron removal at the head of the belt. When the installation position is short, the disk type iron removal can be installed in the middle of the belt.
Different working methods of iron removal equipment with the use of, such as belt conveyor head selection of permanent magnet drum, belt conveyor in the middle of two iron removal points: a point selection of magnetic disk, a point selection of permanent magnet belt, this collocation to solve the thick or extra thick material layer iron removal is very effective. The two kinds of PTMS magnetic separator can also be used together.
Belt conveyor bandwidth below 1.4m, it is suitable to use belt permanent magnet PTMS magnetic separator, above 1.6m, it is recommended to use electromagnetic iron removal. When the power capacity is insufficient, permanent magnet should be used to remove iron. In the iron removal machine directly below the bottom of the large belt as far as possible to choose non-magnetic flat roller or non-magnetic roller.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Dry-type PTMS MAGNETIC SEPARATOR bearing spare parts replacement skills
