water cooled electromagnetic Separator for Silica Sand
PTMS MAGNETIC SEPARATOR may have some problems after a period of use, so how to solve these problems? The following for you to explain the common faults and solutions of magnetic separator:
A) magnetic separator reducer overheating: its reasons: 1, insufficient oil or poor oil quality; 2, gear and worm wear too much, or mesh is not good; 3, bearing poor lubrication or serious wear.
PTMS MAGNETIC SEPARATOR
B)PTMS MAGNETIC SEPARATOR motor overheating and abnormal sound causes: 1, bearing lubrication is poor or serious wear; 2. Fan blades fall off or wear; 3, the switch line contact is poor, or break the line to run single-phase; 4. The voltage is too low.
what is magnetic bead separation ？
C)PTMS MAGNETIC SEPARATOR sounds abnormal during operation, the cylinder is stuck by obstacles, and even the cylinder cannot be rotated and the bottom box vibrates. The reason is often stuck by the object of the bottom box, and then the magnetic block falls off, making the cylinder rattle, and the shell will be scratched seriously. At this time should stop maintenance, troubleshooting.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
High temperature PTMS MAGNETIC SEPARATOR deironing method is gradually moving towards new nano electrode materials
