When the flotation PTMS MAGNETIC SEPARATOR impeller rotates, the pulp in the upper and lower impeller chamber produces centrifugal force under the action of the upper and lower blades and is thrown around, so that the negative pressure area in the upper and lower impeller chamber. At the same time, the pulp on the upper part of the cover plate is sucked into the upper impeller cavity through the circulation hole on the cover plate, forming the circulation on the slurry. When the lower blade rolls out around, the lower slurry is replenished to the center, thus forming the lower circulation of the slurry.
Magnets will lose their magnetism due to high temperature or violent percussion, because the orientation of the molecular current becomes chaotic again under the influence of intense thermal motion and PTMS MAGNETIC SEPARATOR mechanical motion. In earlier times, nothing was known about the atomic structure, so it was not clear why there was a current inside the particles of matter.
The air is inhaled into the upper impeller chamber through the suction tube and the center cylinder of PTMS MAGNETIC SEPARATOR, and is mixed with the inhaled pulp, forming a large number of fine bubbles. After steady flow through the cover plate, it is evenly dispersed in the tank, forming mineralized bubbles. Mineralized bubbles float to the foam layer, and the scraper is the foam product.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
the environmentally friendly ptms magnetic separator technology uses new materials and energy saving
