The use and operation of any equipment must be in accordance with the original scientific method of operation and use, only in this way can give full play to the characteristics and role of the equipment. The following points must be paid attention to before the wet PTMS Magnetic Separator is used to ensure that the magnetic separation achieves better production results.
1. Before wet magnetic separation work, it is necessary to comprehensively check whether the operating mechanism of all parts is normal. Wipe the guide rail of the rocker arm clean with fine cotton yarn and oil according to the lubricating oil brand.
2. Wet PTMS Magnetic Separator Rocker arm and headstock can be operated only after each part is locked. There shall be no obstacles within the range of its rocker arm. Before opening the powder machine, the table, the workpiece, the fixture, the cutting tool of the magnetic separation machine, must find the right, fastening. Correct selection of spindle speed, feed quantity, not overload use. Drilling beyond the table, the workpiece must be smooth.
3. When the wet PTMS Magnetic Separator is running and automatic feeding, it is not allowed to change the tightening speed. If the speed change can only be carried out when the spindle stops completely. Loading and unloading cutting tools and measuring workpieces must be carried out in the shutdown. It is not allowed to drill the workpieces directly with hands or wear gloves. Abnormal sound is found in the work, must stop immediately to check and troubleshoot.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com