The inclusion size also has great influence on the separation index of dry binomeric PTMS magnetic separator. The index of coarse particle separation is better than that of fine particle separation. This is mainly because when dealing with coarse grain level, due to the coarse material, less moisture and mud content, it is easy to disperse on the cylinder, which is conducive to the separation of magnetic and non-magnetic ore particles, and also conducive to improving the processing capacity.
The fluctuation of feed ore has little effect on the sorting effect. The particle is coarse, the weight is large, and the centrifugal force on the PTMS magnetic separator roll is also large. Therefore, the rotational speed of the roll must be strictly controlled. And pay attention to adjust the position of baffle in time with the change of speed. Do not stand in front of it when it starts, so as to prevent it from hurting people with iron.
During the operation, attention should be paid to whether the operation is smooth, whether there is abnormal noise and its iron removal situation. Attention should be paid to the iron unloading belt shall not run off and crack. Coal conveyer belts are usually PTMS magnetic separator continuously during operation. Pay close attention to the temperature of the exciter and the operating condition of the fan. Stop the machine for checking when it exceeds 100 degrees Celsius.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Why for PTMS Electromagnetic Separator magnetic roll the static balance test should be done after replacement
