In the production process of daily ceramics, excessive iron content will seriously damage the ceramic products. On the one hand, it will affect the whiteness of goods; On the other hand, a large number of spots will occur, which will affect the progress of commodity quality. For this case, the iron removal process in ceramic PTMS magnetic separator processing is not uncommon. In particular, the fine porcelain clay materials with low iron content are getting drier and drier, so the iron removal in the processing of porcelain clay materials needs to be further strengthened.
In this regard, there is a growing demand for iron partitions in the ceramic industry and an increasing demand for them. However, disadvantages of conventional iron separators, such as working in humid environments for long periods of time, have become increasingly apparent. The excitation coil is easy to short circuit due to moisture, resulting in scorching coil. PTMS magnetic separator is increasingly used in ceramic industry.
PTMS magnetic separator structure and working principle are made of engineering pure iron, which is not easy to rust. When the slurry is fed from the bottom of the equipment to remove iron, it will not cause filter clogging due to the high concentration of the slurry.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com