Wet PTMS Electromagnetic Separator maintenance precautions:
1, pay attention to the temperature rise of lubricating oil and cooling oil during operation, and report to the workshop director when it is too high, in order to take necessary measures, such as shutdown maintenance.
2. Replace lubricating oil regularly.
3. When the temperature rise of the reducer exceeds the limit, it should be immediately reported to the workshop leader and stopped for inspection and treatment.
4, the medium plate is not required to string not blocked, keep 20 to 30 days to clean once, PTMS Electromagnetic Separator regularly replace the medium plate (such as a year or half a year depending on the wear of the tooth plate), and pay attention to the gland screw to tighten.
5, pay attention to observe whether the pointer of each oil pressure meter, water pressure meter, voltmeter, ammeter is flexible, whether the reading meets the requirements, and find the relevant personnel to deal with the problem in time.
6,Pay attention to the working condition of the front and rear equipment associated with PTMS Electromagnetic Separator, especially the front weak magnetic, slag removal and other operations must work normally, in order to create good working conditions for strong magnetic operations.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Preparation work before implementing PTMS MAGNETIC SEPARATOR energy-saving retrofit
