1.Daily check the bolts and fasteners of the machine, check whether there is corrosion.
2. Check whether the magnetic separator equipment has abnormal sound, such as abnormal sound to determine the problem, and timely treatment.
3. Check the wear of the stainless steel bucket. In serious cases, it is necessary to stop the machine and replace it.
4. Check the lubrication degree of the magnetic separator chain, ensure that there is no falling, no jumping teeth, ensure that the end face of the sprocket in the same plane.
5. Check the vibration of PTMS magnetic separator and whether there is oil leakage.
6. Check that the water pressure of the bottom flushing pipe is not less than 0.12Mp to ensure that there is no impurities in the pipe to prevent blockage.
7. Check whether the magnetic separation components are normal, pay special attention to the rotation gear in the process of equipment operation, if there is abnormal impact sound should be immediately stopped for maintenance.
8. Check whether there are impurities in the sub-box and check the wear of the sub-box.
9. Check whether the wear-resistant material of each pulp distribution box is worn out.
10. Determine the position and Angle of the magnetic pole every day, and adjust it in time when changes are found to ensure the recovery rate of magnetite.
11. Check that the liquid level in PTMS magnetic separator is stable and there is a small amount of overflow.
12. Observe the feeding quantity and concentration, magnetic induction intensity, fan magnet Angle, main selection, sweep selection, dehydration area and corresponding working clearance, etc., to ensure that they are within the normal requirements.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Preparation work before implementing PTMS MAGNETIC SEPARATOR energy-saving retrofit
