Because the gangue in the original ore was abandoned, so the grade of the iron ore was improved. The electricity consumption of the whole equipment is 4-11KW, and the input cost of magnetic separation is very low. If the spacing of wet PTMS Electromagnetic Separator is too large, the particles with relatively strong magnetic properties can only be selected, and the weaker ones cannot be selected. Although the grade of concentrate is improved, the grade of tailings is also increased, thus reducing the recovery rate.
The spacing between the cylinder and the groove is the working gap of PTMS Electromagnetic Separator, which is one of the important factors affecting the working efficiency of the wet magnetic separator machine. The appropriate gap can ensure the magnetic separation effect and magnetic separation efficiency, and the work quality is high, so when using the wet magnetic separator machine, it should be adjusted according to the requirements of the equipment itself.
The gap of wet PTMS Electromagnetic Separator is too small, that is, the distance between the barrel and the trough is too close, the pulp is not smooth, affecting the processing capacity, and because the spacing is too small, the magnetic size of the particles will have a full opportunity to suck to the barrel, mainly because the pulp is too close to the magnetic field, the magnetic field strength is very high. However, it is beneficial to reduce the tailings grade and improve the recovery rate.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Dry-type PTMS MAGNETIC SEPARATOR bearing spare parts replacement skills
