Wet high intensity magnetic field PTMS Electromagnetic Separator, also known as double disc high intensity magnetic separator, is a magnetic separation equipment manufactured according to relevant data. The steel frame is equipped with two U-shaped magnetic yoke, the horizontal part of the yoke is covered with an exciting coil, and the axial flow fan is used for forced cooling. The disc is provided with a coalesce pipe, the ore receiving groove is provided below, and the corresponding part of the coalesce pipe is provided with a feeding nozzle.
PTMS Electromagnetic Separator Upper and lower separator are mounted on a vertical central axis, and the disks rotate between two relative magnetic poles. The U-shaped yoke magnetic poles form a large closed magnetic circuit with the upper and lower separator disks. The upper and lower separator disks are the main circuits in the magnetic circuit. There are 17 sorting chambers on the periphery of the disk, which are equipped with multi-layer magnetic tooth plates to become induction magnetic poles.
PTMS Electromagnetic Separator equipment is caught by objects in the bottom box, and then the magnetic block falls off, causing the cylinder to rattle, and in severe cases, the shell will scratch. At this time should stop maintenance, troubleshooting. Reducer overheating causes: insufficient oil or poor oil quality; Gear and worm wear too much, or mesh is not good; Bearings are poorly lubricated or severely worn.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com