The following contents should be paid attention to in the whole process of installation: Pay attention to the protection of the ecological environment and keep the construction site clean. Clean up waste and electrical grade heads and then send them to specific acquisition addresses. Waste oil, sand cloth, paint drums, soft brush and other dangerous wastes in engineering construction and manufacturing shall not be thrown away. Purchase and disposal shall be carried out in accordance with relevant requirements.
PTMS magnetic separator Monitor fire, electricity, gas etc. in the operation process and terminate automatic welding machines and pneumatic valves immediately. Acquisition of raw materials after application to reduce costs. If the SCR module and rectifier components are replaced, the technical parameters should be similar to the original. The operator is required to disconnect the main power switch when the iron removal machine is not used for a long time.
PTMS magnetic separator usually the magnetic core is fixed on the cover plate. When cleaning the ferromagnetic impurities on the surface of the magnetic core, open the fixing bolt of the cover plate, lift the cover plate and clean the iron impurities on the surface of the magnetic bar. It is convenient in practice. The magnetic force of fluid iron removal will attenuate after 3-5 years of use due to the use of rare earth permanent magnets. It can be detected regularly. If the magnetic rod cannot meet the use requirements, it only needs to be replaced.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Consolidate the market position with the advantages of PTMS Electromagnetic Separator technology
