According to the reason of PTMS magnetic separator, the customer should pay attention to the protection of the magnetic block when using the machine. How to protect the magnetic block, the first method is to protect the shell on the surface of the magnetic block of the machine: using PVC coating to wrap the shell, adhesive bonding PVC coating, can greatly improve the service life of the shell;
Method two is PTMS magnetic separator fixation. Glass ribbon coated with epoxy resin, iron packing belt and stainless steel plate were used to wrap the magnetic system as a whole. According to the test results, 0.5 thickness of stainless steel plate was used to wrap the magnetic system. The joints at both ends of the stainless steel plate are clamped with thin plates and fixed with bolts, and finally connected with bolts to adjust the tightness.
This not only has little influence on the surface magnetic field of the magnetic system, but also has a strong enough wrapping and tightening force for the magnetic system. After adopting this method, the magnetic block has never fallen off, which completely solves the problem of magnetic system fixation. It is also important to prevent the PTMS magnetic separator device from being exposed to strong sunlight for a long period of time. After using the device for a period of time, it should be inspected and repaired.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The intelligent control system is applied to PTMS MAGNETIC SEPARATOR to solve the disadvantages of traditional methods
