Iron removal method of PTMS MAGNETIC SEPARATOR PTMS MAGNETIC SEPARATOR is often used in zinc leaching solution. The yellow iron alum in the method contains monovalent ions. In the zinc hot acid extraction solution, the iron sulfate changes into the crystal precipitation when the alkali metal is present and the solution is close to the boiling temperature.
In order to remove iron as much as possible during the reaction, it is necessary to add neutralizing agents to maintain the pH value of about 1.5, and the reaction temperature should be close to the boiling point of the solution. This process will consume a lot of reagents and energy, and the precipitated crystals can be removed after precipitation and filtration. In the process of zinc treatment, if the iron content is high, it is possible to use potassium ferite PTMS MAGNETIC SEPARATOR iron removal method to treat, the later alkali metal ions and alum slag need to be properly treated.
In the production of some high purity quartz sand, the requirement of iron impurity content is very low, it requires several PTMS MAGNETIC SEPARATOR and strict inspection. The magnetic separation method can better ensure the purity of quartz sand, improve its quality, in the process of iron removal will the introduction of new chemicals, reduce the impact on the environment.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Why for PTMS Electromagnetic Separator magnetic roll the static balance test should be done after replacement
