During the magnetic separation process, the selection of magnetic separation equipment should be determined according to the different properties of the ore. Permanent magnet cylinder type dry PTMS Electromagnetic Separator uses powder material to the drum, and the magnetic particles are sucked on the cylinder surface and removed to the discharge area and discharged from the magnetic product area. The non-magnetic particles are thrown from the cylinder surface under the action of centrifugal inertial force and discharged from the non-magnetic product area.
PTMS Electromagnetic Separator It is one of the magnetic separator equipment built with high technical level. Its principle is to use a set of coils made of comaterial outside the non-magnetic material, and the coil is generally used for primary selection of low grade ore, high enrichment ratio, which can greatly improve the grinding grade; it is also used for iron concentrate purification, remove companies and gangue, etc.
The pulp enters from the end of the large coil, and the magnetic field is gradually weakening through the direction stimulated by PTMS Electromagnetic Separator. The magnetite particles in the pulp are repeatedly demagnetized, and the remaining magnetization is basically removed by the end of the small coil. At present, demagnetization has been applied in many mine engineering, and has attracted attention in the industry for its good performance.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Why for PTMS Electromagnetic Separator magnetic roll the static balance test should be done after replacement
