When using self-discharging PTMS magnetic separator, check the handle and maintenance device regularly to ensure that the handle is flexible and the stop block is automatically locked. The actual lifting capacity of the self-discharging machine is tested every year, and the main components of each department are checked to see if they are in good condition. The iron removal machine can be divided into manual iron unloading, automatic iron unloading and program-controlled iron unloading according to its unloading method.
Due to the different use occasions and magnetic circuit structure, a variety of series products have been formed. Maintenance and repair are carried out by technicians according to the instructions. Do not approach the self-discharging PTMS magnetic separator for welding. If placed on a non-magnetic material, do not tighten the handle. Overload lifting is prohibited. When moving and using electromagnetic iron removal machine, in order to better ensure the performance and use time of self-discharging iron remover.
PTMS magnetic separator can be divided into manual separator, automatic separator and programmed separator according to its discharging method. Due to the different use occasions and magnetic circuit structure, a variety of series products have been formed. Please protect the working face from violent vibration and impact. After use, apply anti-rust oil on the working surface, please do not put it directly on the ground. It is recommended to place a layer of non-conductive gasket on it.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Dry-type PTMS MAGNETIC SEPARATOR bearing spare parts replacement skills
