Permanent magnet PTMS Magnetic Separator installation test run, the device should be installed on a horizontal concrete foundation, fixed with anchor bolts. It should pay attention to the main body and horizontal vertical installation. After installation, check whether the bolts in each part are loose and whether the door of the main engine compartment is tightened. If yes, tighten it. Power cables and control switches are configured according to the power of the device. After the inspection, the empty load test is carried out, and the production can be carried out when the test is normal.
The maintenance of permanent magnet PTMS Magnetic Separator machine is a very important and regular work. It should be closely cooperated with the operation and maintenance of the machine. There should be full-time personnel on duty for inspection.
In order to improve the iron power of PTMS Magnetic Separator, some factories generally choose two or three levels of iron removal method, which can meet the requirements of the factory under conventional circumstances. First of all, the mineral is in the rock layer, the bottom of the iron mixture by a small electromagnetic force and also by the upper pressure, so the effect of iron removal is not good. In order to improve the iron removal effect of PTMS Magnetic Separator, PTMS applies a "short-time strong excitation" to the electromagnet, that is, the sensor is mounted on the front side of the electromagnet pole sheet and below the conveyor belt.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
the environmentally friendly ptms magnetic separator technology uses new materials and energy saving
