PTMS DRY Magnetic Separator control box is equipped with manual/automatic switching switch, with local/remote control function, manual operation on the disk can manually start/stop each electric equipment, automatic control through the automatic control system remote control, one way when using another kind of automatic locking operation; The temperature protection function is set separately for the iron removing coil;
PTMS DRY Magnetic Separator shall be able to provide the operation, stop and fault signals of the device to the feed programmed PLC (the signal shall be passive DRY contact with a small capacity of 230VAC, 3A) and accept the start and stop signals from the feed programmed PLC (the signal shall be passive DRY contact, 3A) by the electromagnetic iron Separator. Contact small capacity 220VAC, 3A).
PTMS DRY Magnetic Separator All control cabinets and rectifying cabinets should have good sealing, protection should reach IP54. And there are corresponding terminals involved in program control. The iron remover shall be able to participate in system interlocking and remote program control. All rectifier cabinets and control cabinets shall be made of stainless steel.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com