The accurate measurement of the working gap can be made when PTMS Electromagnetic Separator is being repaired by placing a piece of plasticine near each end of the baseplate, fitting the tank, adding the spacer, then putting down the tank, and taking out the plasticine to measure the thickness of the squishing. Rough measurement can open the drawing holes at both ends of the tank, reach out to feel the gap, you can know its rough value.
When the magnetic system deviates, the tailings grade is low, but when the concentrate can not be lifted to the concentrate end and fall off, the tailings grade will increase. If the magnetic system is tilted forward, the concentrate will be raised too high, the sweep selection will be shortened, and the tailings grade will be increased, so the magnetic system deflection Angle should be adjusted to a moderate position. PTMS Electromagnetic Separator is one of the most widely used and highly versatile machines in the industry, which is suitable for the reuse of powdered particles to remove iron powder.
PTMS Electromagnetic Separator is widely used for resource recovery in wood industry, mining industry, kiln industry, chemical industry, food industry and other factories. The magnetic separator is suitable for wet or dry magnetic separation of magnetite, pyrrhotite, calcined ore, ilmenite and other materials with particle size below 3mm, and is also used for iron removal of coal, non-metallic ore, building materials and other materials.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Dry-type PTMS MAGNETIC SEPARATOR bearing spare parts replacement skills
