PTMS Electromagnetic Separator Parts replacement skills: tin welding requires the operator to have an accurate grasp of the welding temperature and the amount of tin material, too high temperature may lead to the deformation of the material around the sieve net, and too much tin material may block the sieve hole. If a large area is damaged, a new sieve should be replaced. There are some detailed requirements to follow when installing the new screen.
The installation of the new screen should make the sieve with the burr side inward and smooth face outward, because the burr side can reduce the sliding of the material in the PTMS Electromagnetic Separator screening process, making the material easier to be screened, while the smooth face outward can help to keep the surface of the screen clean and avoid material residue. It is critical that the film and frame be closely fitted.
If the fit is not tight, it may lead to material leakage during the PTMS Electromagnetic Separator process, which will affect the accuracy and efficiency of the magnetic separation. For the ring sieve, the lap stubble should be in the rotation direction, in order to prevent the material from getting stuck at the lap. Once the material is stuck at the lap place, it will not only affect the normal work of the screen, but also may hinder the operation of the entire magnetic concentrator, and even may damage the screen or other related components.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
the environmentally friendly ptms magnetic separator technology uses new materials and energy saving
