PTMS Electromagnetic Separator must be fully checked to see whether the operating mechanism of all parts is normal before working. Wipe the guideway of the rocker arm with fine cotton yarn and fill it with oil according to the lubricating oil grade. The rocker arm and headstock of the magnetic separator can be operated only after each part is locked. There shall be no obstacles within the rotating range of the rocker arm of the magnetic separator.
PTMS Electromagnetic Separator Before opening the powder machine, the table, workpiece, fixture and cutting tool of the magnetic separator must be aligned and fastened. The magnetic separator correctly selects the speed of the main shaft and the feed amount, and shall not be overloaded. Drilling beyond the table, the workpiece must be smooth. When the magnetic separation machine tool is running and automatically feeding, it is not allowed to change the fastening speed, and if the speed change can only be carried out until the spindle is completely stopped.
PTMS Electromagnetic Separator Loading and unloading cutting tools and measuring workpieces must be carried out in the shutdown, do not drill the workpieces directly by hand, do not wear gloves operation. When the magnetic separator is working, it is found that there is an abnormal sound, and it must be stopped immediately to check and troubleshoot
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Dry-type PTMS MAGNETIC SEPARATOR bearing spare parts replacement skills
