PTMS Electromagnetic Separator Repair and replacement of wear-resistant repaired screens, which are made of thin steel or iron perforated. When the screen is worn or broken down by foreign matter, if the damage area is not large, it can be repaired by riveting or tin welding; If large area damage, should replace the new screen. When the screen is installed, the screen hole is smooth on the outside, and the burr surface is in the inside, and the screen sheet and screen frame are tightly adhered to.
When installing the ring screen, the stubble of the inner layer should comply with the rotation direction to prevent material from getting stuck. Magnetic separator wear-resistant repair of the roller cylinder replacement, Henan magnetic separator roller cylinder replacement, should first use a hook wrench to unscrew the round nut, and then use a special pull to pull out the roller cylinder. In order to ensure the working balance of the rotor, the magnetic roller should be replaced with a complete set, and the static balance test should be done after the replacement to make the PTMS Electromagnetic Separator work stably.
When installing, be sure to tighten the nut, and be careful not to miss the spring washer. The above three aspects of detailed introduction from bearing smoothing and replacement, screen repair and replacement, roller magnetic cylinder replacement for us to explain PTMS Electromagnetic Separator wear repair parts repair technology.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com