PTMS magnetic separator stop Controls the stop of the belt conveyor. The closing relay on the belt conveyor control cabinet is powered off, and the normally open contact is disconnected. Self - unloading series with delay stop function. After cutting off the power, shut down the relay and stop running. Generally speaking, there are several main cleaning methods. We can clean it according to the appropriate method when we use it daily.
In the process of PTMS magnetic separator cleaning, attention should be paid to some details to avoid damage to the equipment due to improper cleaning operation, which may affect the later use of the equipment. Dry series is for dry magnetic mineral separation of magnetic separation machinery, relative to wet magnetic separator separation minerals to use liquid as diluent to improve the efficiency of separation,
Dry PTMS magnetic separator requires the mineral to be dried and the particles can move freely to form independent free states. Otherwise, the magnetic separation effect will be affected or even unseparable. The starting control is carried out simultaneously with the starting of the belt conveyor. Start the belt conveyor, connect a pair of normally open contacts on the closing relay of the high pressure control cabinet, and start working after receiving the operation instruction.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Dry-type PTMS MAGNETIC SEPARATOR bearing spare parts replacement skills
