PTMS MAGNETIC SEPARATOR Magnetic system is open magnetic system, installed in the cylinder and exposed full magnetic. The magnetic block is installed on the bottom plate of the magnetic yoke with stainless steel bolt, the shaft of the magnetic yoke is extended out of the cylinder, and the shaft end is fixed with a turning arm. Turning the turning arm can adjust the bias Angle of the magnetic system, and it can be fixed with a pull rod after adjusting properly. The working area of the tank body is made of stainless steel plate, and the frame and other parts of the tank body are welded with ordinary steel.
After the slurry flows into the tank through the feeding tank, the ore particles enter the tank area loose under the action of the feeding water spray pipe. Under the action of the magnetic field, the magnetic mineral particles occur magnetically poly to form a "magnetic mass" or "magnetic chain", "magnetic mass" or "magnetic chain" in the pulp by magnetic force, to the magnetic pole movement, and is adsorbed on the PTMS MAGNETIC SEPARATOR cylinder.
PTMS MAGNETIC SEPARATOR Classification, according to the number of magnetic system can be divided into: single cylinder magnetic separator, double cylinder magnetic separator and combined multi-cylinder magnetic separator; according to the feeding mode classification can be divided into: upper feed magnetic separator, lower feed magnetic separator; according to the magnetic field strength classification can be divided into: weak magnetic magnetic separator, medium magnetic magnetic separator and strong magnetic magnetic separator;
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The high-gradient PTMS MAGNETIC SEPARATOR adopts a modular design concept, which is conducive to installation
