1, first clean up the transportation and loading process of debris, clean up the PTMS magnetic separator cylinder, hand rotation magnetic separators should be without collision, noise, tighten loose screws.
2. The reducer is filled with lubricating oil, and the number is subject to the oil window indication. The magnetic separator that has a long factory time or is used in an environment other than the ambient temperature of -5 ~ 35 ° C should be filled and replaced according to the local environment.
3, power supply, empty PTMS magnetic separator operation for more than 3 hours, no abnormal before commissioning test.
4, adjust the magnetic system adjustment screw, the general magnetic force line exposed stainless steel plate 15 ~ 20mm can be smoothly discharged.
5, stop feeding first, continue to operate, wait for the material to be emptied before stopping. When starting up, start up first, feed water before feeding.
6, magnetic separators should be regularly maintained, lubricated active parts, fastening screws.
We will continue to update the technology and improve the ability in the manufacture of wet PTMS magnetic separator, and will fully play the strength of our wet magnetic separators. Our manufacturers are also actively updating the dry magnetic separation machine in technology, and gradually let our dry magnetic separation machine technology to the peak.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
This PTMS MAGNETIC SEPARATOR iron removal process is a dynamic and continuous process
