PTMS magnetic separator is a good iron removal equipment at present, but people in the process of use often appear some small faults, that may be the use of the wrong operation, so in order to better use the iron removal machine, the following is to introduce the operation precautions.
After driving, pay attention to listen to the running sound of the winch, find abnormal should stop in time to find out the cause of treatment before driving.
When the wire rope is entangled, the PTMS magnetic separator must be processed after parking. It is forbidden to process while running, and the rope is not allowed to be picked by hand. Do not put all the wire rope on the roller in the work, should keep at least three to five laps. The control cabinet should be reliably grounded, not too close to the belt, should be timely to take shock absorption measures for some equipment in the cabinet, reduce the hidden danger to drunk low.
If it is found that PTMS magnetic separator fast melting core is broken, it should be determined and eliminated after the fault, can be replaced with the same type of core specifications, so as not to expand the accident, and can not be used to replace the rapid melting core with ordinary core, in order to protect the silicon controlled module and rectifier components.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Dry-type PTMS MAGNETIC SEPARATOR bearing spare parts replacement skills
