PTMS MAGNETIC SEPARATOR Choose materials with good corrosion resistance and wear resistance. Among the many materials, ceramic materials is a very ideal choice. Ceramic materials have extremely high hardness and wear resistance, which can effectively resist the friction of magnetic particles. At the same time, it also has excellent chemical stability, and has a strong resistance to the corrosive substances in the mineral pulp. In addition, some polymer composites are also favored.
Ceramic materials can be customized according to the specific requirements, which can ensure the wear resistance, but also have good flexibility, and can better adapt to the deformation of PTMS MAGNETIC SEPARATOR parts in the operation process. A high-precision hardness tester can be used to detect the repaired surface hardness, to ensure that its hardness can meet the standard of the original parts.
The repaired parts shall be restored to a near-original performance status. This requires that after repair, the wear resistance, corrosion resistance and working performance in the magnetic field are almost the same as the original state. To accurately assess the PTMS MAGNETIC SEPARATOR repair effects, a series of advanced detection methods are needed.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The combined advantages of PTMS Electromagnetic Separator with refined and reduced slag and PTMS Electromagnetic Separator with permanent magnet wet are discussed
