The magnetic system of wet PTMS magnetic separator is made of high quality ferrite material or composite with rare earth magnetic steel. The average magnetic induction intensity of the cylinder is 100 ~ 600mT. According to the needs of users, it can provide a variety of different surface strength magnetic separation such as down-current, semi-counter-current, counter-current type. The magnetic separators have the advantages of simple structure, large processing capacity, convenient operation and easy maintenance.
PTMS magnetic separator process is to mince the ore to 5mm or 3mm below, and then carry out wet magnetic separation with a permanent magnetic field. This process is of great significance for saving energy, reducing consumption, effectively utilizing extremely poor iron ore and improving the quality of final iron concentrate.
PTMS magnetic separator in the determination of the strength of the magnetic field to use the flux meter, the flux meter is actually an electromagnetic ammeter with a moving coil, when there is a current through, the flux meter pointer along the dial swing, the determination principle is as follows: When the detection coil is placed into the magnetic field to be measured, if the magnetic field trapped by the coil changes, there will be a current through the detection coil, and the detection coil and the flux meter are connected to form a loop, and the current will deflect the flux meter pointer.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com