In order to ensure the normal operation of self-discharging PTMS magnetic separator, routine maintenance is essential. Under the action of the magnetic field, the magnetic ore particles magnetically aggregate to form a "magnetic mass" or "magnetic chain", which moves to the magnetic field under the action of the magnetic force in the pulp and is adsorbed on the cylinder. Since the magnetic fields alternate along the direction of rotation of the cylinder and are fixed in motion,
Therefore, when the "magnetic block" or "magnetic chain" rotates along with the PTMS magnetic separator cylinder, magnetic agitation occurs due to magnetic alternations, and non-magnetic minerals such as gangue mixed in the "magnetic block" or "magnetic chain" fall off in the rotation process, and the "magnetic block" or "magnetic charge" adsorbed on the surface of the cylinder is concentrated. The adjustment of operation control shall be carried out by the company according to the actual situation of the fire site or place. Besides, it is prohibited to install the fence outside the scope of the iron falling parts to prevent personnel from approaching the operation.
PTMS magnetic separator Operation Control Mode There are two operation control modes: field manual control mode and remote automatic control mode during the startup of the intermediate control room. Under normal operating conditions, the operation of the iron remover enters automatic control mode.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
the environmentally friendly ptms magnetic separator technology uses new materials and energy saving
