There are three types of PTMS magnetic separator: down-flow, counter-flow and semi-counter-flow. The magnetic separator for the other two tanks of the weak field wet permanent magnet series has basically the same structure. The magnetic system is mainly composed of magnetic blocks and magnetic yoke. The magnetic system has three to five poles, depending on the diameter of the cylinder. The magnetic block is made of strontium ferrite.
The magnetic blocks are 8660 in size and 15, 18 and 21 mm thick. PTMS magnetic separator Polar groups usually consist of five parts. Poles are copper bolts that are used as non-magnetic materials. They are fixed to the yoke or bonded to the yoke with epoxy resin. Yoke iron is made of mild steel or pure industrial iron. Its function is to connect magnetic blocks, form a radial magnetic system, and play a role in magnetic conductivity. The polarity of the magnetic poles alternates in a circular direction.
PTMS magnetic separator is an indispensable and important equipment in magnetic separation process. It deals with the material supply magnetic separator, timely completion of the material is conducive to the rapid loading and unloading of wet concentrate, must play a very important role. Therefore, in the selection of 20 tons per hour output of magnetic separator, we should pay attention to choose cost-effective products.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
the environmentally friendly ptms magnetic separator technology uses new materials and energy saving
