The dust particles moving in the vortex will be affected by gravity, wind and rotating centrifugal force at the same time. The fine particles are sucked into the rotor along with the air flow, flow through the air pipe and enter the dust collector behind as finished fine powder and are separated by PTMS magnetic separator. The coarse and heavy particles fall, collect through the inner cone to the coarse powder receiving cylinder, and return to the mill for grinding. Changing the rotor speed can effectively adjust the fineness of the finished product
The material is fed into the upper inlet to form a material curtain, and the inlet air passes through the material curtain through the air inlet and makes contact with the material. In the powder selection area, it is dispersed by a stepped inclined baffle arranged on the inlet side and outlet side of the PTMS magnetic separator. The material collides back and forth at the ends of the two baffle plates to achieve the effect of breaking up the material block, fully exposing the fine powder and extending the residence time of the material curtain in the powder selection area.
The coarse material is discharged along the guide plate, and the gas with the material is discharged from the exhaust outlet and enters the separator for sorting, so that the material and gas are separated. The function of the baffle to guide the flow and the material. This form of PTMS magnetic separator is completely lifted, transported and graded with high precision by wind.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Dry-type PTMS MAGNETIC SEPARATOR bearing spare parts replacement skills
