PTMS magnetic separator for belt adjustment Do not step on the belt during shutdown, otherwise it will affect the effect of belt adjustment. If the belt runs a lot to one side, you can switch any two phases of the motor three-phase feed line, the belt will move in the opposite direction to the other side, move to the middle of the iron removal machine stop, again switch any two phases of the motor, so that the belt runs in the normal direction,
Then according to the belt deviation specific adjustment method debugging. After the belt deviation is stopped, the belt shall be operated stably in the middle of the PTMS magnetic separator for 2 hours. During the operation, the belt shall be observed and adjusted in time if there is any deviation.
But pay attention to if the two sides of the belt are not uniform, resulting in one tight side loose, the friction on the tight side of the drum PTMS magnetic separator will go to the tight side, so it is easy to lead to belt iron removal machine belt deviation. PTMS magnetic separator is widely used for iron removal in a variety of environments. It is a highly efficient operation.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The high-gradient PTMS MAGNETIC SEPARATOR adopts a modular design concept, which is conducive to installation
