In the selection of different wear layer protection materials, epoxy resin layer can also be used to protect the shell, but because of its specific operation method is more complex, so it is not widely used. PTMS magnetic separator should be regularly maintained after a long time of use, the components of the equipment should be carefully inspected, and the protection material should be maintained according to the specific conditions of the equipment to achieve the most effective equipment protection.
Characteristics of PTMS magnetic separator: large processing capacity, high recovery rate and less water consumption. Due to the composite magnetic system composed of polymagnetic technology, the magnetic field depth around the disk is up to. The field strength is high, the gradient is large, and the recovery amount is 2-3 times that of other similar products when used on site. The tailings magnetic separator is easy to discharge and the magnetic block is not worn.
PTMS magnetic separator adopts moving magnetic field technology to absorb mineral powder under the action of water impulse, with the help of moving magnetic field magnetic force, mineral powder automatically collects near the outer edge of the disk, because the outer edge of the disk is the same magnetic pole (N or S), according to the principle of magnetic field repulsion, the scraper is easy to scrape it down and leave a protective layer on the magnetic surface.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com